Hello!

Xaudia offer microphone re-ribboning and repair services.

2014/10/30

2-Track Mind's Tannoy mic restoration


Here is a nice article by Seth at the 2-Track Mind blog, describing how he restored a very early Tannoy ribbon microphone. Seth went to great lengths, building his own corrugator and refinishing the mic, and the results look great. I played a tiny role here and was able to supply a little brass mount so that he could put it on a stand.


The mic itself is quite unusual, and the motor assembly (above) is different to most of the other Type 1 Tannoy ribbon mics that I have seen. Below is the more usual look of these mics inside, with a large cylindrical magnet and simple flat pole pieces:


It is becoming clear that Tannoy made many different variations on their ribbon mics. I feel a big Tannoy blog post coming on...

2014/10/25

Syncron AU7A schematic (again)


Many thanks to Dan Zellman, a former Syncron employee, who sent in this schematic for the AU7A condenser microphone. This was the 'last issue' diagram.

Syncron AU7A factory schematic

There are a few differences from my traced circuit that I posted in an earlier blog entry, most noticeably I had the 42V battery supply reversed.  Also, I have worked on several of these mics, but have never seen one with the 470pF capacitor present. 

SJT 25/10/14